Version A,
Version B
Version C |
 |
Version D |
928.00/01
|
548.00/01
|
[ Top | Otto Small | Version A | Version B | Version C | Version D | Return to Figure Eights ]
I acquired this eight from Walkhigh Mountaineering in 2007.
The Camp 548.00/01 (Otto Large) is forged from aluminum alloy and then hard anodized. Mine is 146 mm. tall, 76 mm. wide, and 16 mm. thick. The rope hole is 51 mm. high and 51 mm. wide. The top center thickness is 12 mm. The shaft length and width are 45 mm. and 26 mm., respectively. The eye measures 26 mm. by 26 mm. My eight weighs 123 g.
The front of the shaft is etched with "CAMP." The other side has "kN30" in raised characters. The top front is also etched with "2L."
The Camp, Version B is a typical example of a full sized, forged, aluminum figure eight. This eight us hard anodized so it will wear well until the anodizing breaks through.
[ Top | Otto Large | Version A | Version B | Version C | Version D | Return to Figure Eights ]
I acquired this eight from Walkhigh Mountaineering in 2007.
The Camp 928.00/01 (Otto Small) is forged from aluminum alloy and then hard anodized. Mine is 131 mm. tall, 74 mm. wide, and 13 mm. thick. The rope hole is 48 mm. high and 48 mm. wide. The top center thickness is 11 mm. The shaft length and width are 44 mm. and 25 mm., respectively. The eye measures 18 mm. by 24 mm. My eight weighs 102 g.
One side is stamped with "CAMP." The other side is stamped "kN25" in raised characters. The top rear is also marked "0201."
The Otto Small is a typical example of a "midi" size, forged, aluminum eight. This eight us hard anodized so it will wear well until the anodizing breaks through.
[ Top | Otto Small | Otto Large | Version B | Version C | Version D | Return to Figure Eights ]
I acquired this eight from Michael Adams in 2004.
The Camp, Version A is forged from aluminum alloy and then soft anodized. Mine is 114 mm. tall, 68 mm. wide, and 15 mm. thick. The rope hole is 40 mm. high and 46 mm wide. The top center thickness is 12 mm. The shaft length and width are 34 mm. and 21 mm, respectively. The eye measures 19 mm. by 24 mm. My eight weighs 97 g.
The front of the shaft is stamped with "CAMP" and "ITALY." The rear is stamped with "2500 dan."
The Camp, Version A is a typical example of a "mini" size, forged, aluminum eight. It is essentially identical to the Mammut Version C, Salewa Mini, and Trango Mini.
The Camp, Version A is lighter than most figure eights. The eye is too small for Sticht-type belaying. The top rear of the upper loop is stamped "0394."
[ Top | Otto Small | Otto Large | Version A | Version C | Version D | Return to Figure Eights ]
I acquired this eight from Mandatory Gear in 2007.
The Camp, Version B is forged from 6082-T6 aluminum alloy. Mine is 131 mm. tall, 74 mm. wide, and 13 mm. thick. The rope hole is 48 mm. high and 48 mm. wide. The top center thickness is 11 mm. The shaft length and width are 44 mm. and 25 mm, respectively. The eye measures 19 mm by 25 mm. My eight weighs 102 g.
One side is etched with "CAMP." The other side has "kN25" in raised characters. The top rear is also marked "0605."
The Camp, Version B is a typical example of a "midi" size, forged, aluminum eight. It is essentially identical to the Advanced Base Camp Versions A and B, AustriAlpin, Camp/Lowe Versions A and B, CH, CT Ltd., Lucky Ecos Mini, Mammut Versions B and D, and Salewa Midi. This eight us unfinished so it will wear quickly.
The eye is too small for Sticht-type belaying.
[ Top | Otto Small | Otto Large | Version A | Version B | Version D | Return to Figure Eights ]
I acquired this eight from Kendall Chun in 2007.
The Camp, Version C is forged from aluminum alloy. Mine is 132 mm. tall, 74 mm. wide, and 13 mm. thick. The rope hole is 48 mm. high and 48 mm. wide. The top center thickness is 11 mm. The shaft length and width are 43 mm. and 25 mm., respectively. The eye measures 19 mm. by 25 mm. My eight weighs 105 g.
The front of this eight is stamped "CAMP ITALY," and the rear is stamped "KG. 2500."
The Camp, Version C is a typical example of a "midi" size, forged, aluminum eight. It is essentially identical to the Camp/Lowe Version A, except that the letters in the "CAMP ITALY" stamping are all the same size. This eight us unfinished so it will wear quickly.
The eye is too small for Sticht-type belaying.
[ Top | Otto Small | Otto Large | Version A | Version B | Version C | Return to Figure Eights ]
I acquired this eight from Kendall Chun in 2007.
The Camp, Version D is forged from aluminum alloy. Mine is 132 mm. tall, 75 mm. wide, and 13 mm. thick. The rope hole is 49 mm. high and 49 mm. wide. The top center thickness is 11 mm. The shaft length and width are 43 mm. and 24 mm., respectively. The eye measures 19 mm. by 25 mm. My eight weighs 106 g.
The front of this eight is stamped "CAMP ITALY," and the rear is stamped "KG. 2500."
The Camp, Version D is a typical example of a "midi" size, forged, aluminum eight. It is essentially identical to Version C except the stamped text on each side runs downward instead of upward.
[ Top | Otto Small | Otto Large | Version A | Version B | Version C | Version D ]
Eight959.html/070528
©2007, Gary D. Storrick