Landau Rollers

Version A, Version B

[ Top | Version B | Return to Chest Boxes ]

Version A

The Landau rollers are compact devices. The back piece is milled from 5/8-inch (16 mm) aluminum plate. The nylon roller rides on a stainless steel shaft that is press fitted into the aluminum side plates. These attach to the back piece with a quick-release pin. The side plates are milled so that the clearance at the roller is about 3/4 inch (19 mm).

[ Top | Version A | Return to Chest Boxes ]

Version B

Version B uses a wider (17.5) mm back plate. The side plates are larger and cover the roller, and lack the milled step that version A has. The roller shaft is not press fitted to the side plates, but is retained by external retaining rings.

[ Top | Version A | Version B ]